All posts tagged protective coating

Winter brings a unique kind of beauty to our landscapes, blanketing the world in quiet white snow and glistening ice. However, for those of us who need to commute or run errands, this season also brings significant challenges.

We rely heavily on the dedicated crews who plow our streets and apply treatments to keep us safe. While we feel a sense of relief seeing a road cleared of snow, the very substances used to ensure our safety can inadvertently harm the vehicles we depend on.

Municipalities primarily use sand and salt to combat slippery conditions. Salt lowers the freezing point of water, melting ice into a brine that prevents new ice from forming. Sand, on the other hand, does not melt ice but provides much-needed traction for tires on slick surfaces.

This combination is vital for preventing accidents and keeping traffic moving. Yet, this safety comes with a trade-off. The abrasive nature of sand and the corrosive properties of salt can accelerate wear and tear on your vehicle. Understanding this balance helps you take the necessary steps to care for your car, ensuring it remains reliable and rust-free for years to come.

The Impact of Road Salt on Your Car

Salt is incredibly effective at keeping roads clear, but it is chemically aggressive toward steel and iron. When road salt mixes with water from melting snow or slush, it creates a saline solution that acts as a catalyst for oxidation, commonly known as rust.

This chemical reaction speeds up the corrosion process significantly compared to water alone. It is not just the visible body panels that are at risk; the most severe damage often occurs where you cannot easily see it.

The undercarriage of your vehicle is particularly vulnerable because it is constantly bombarded by the salty spray kicked up by your tires. This area houses critical components such as the frame, exhaust system, muffler, and hydraulic brake lines.

When salt accumulates in the nooks and crannies of the chassis, it eats away at the metal. Over time, this can lead to structural weaknesses or mechanical failures, such as a leaking brake line or a detached muffler.

Modern vehicles often have protective coatings, but these can wear down or chip over time, leaving the bare metal exposed. Once the salt brine reaches the metal, the corrosion spreads beneath the paint, often bubbling up in what is known as "rust creep." By the time you see the bubbling paint on the wheel well or the bottom of the door, significant damage may have already occurred underneath.

The Impact of Sand on Your Car

While salt attacks your car chemically, sand attacks it physically. The particles used on roads are often much coarser than the sand you might find at a beach. As you drive, your tires—and the tires of the vehicles around you—fling these small stones and grit into the air at high speeds.

The immediate result is often visible on the front bumper and hood in the form of small paint chips. Each chip compromises the vehicle’s clear coat and paint, creating a small entry point for moisture and salt to enter and begin the rusting process.

Your windshield and headlights are also susceptible to pitting from flying sand. Over the course of a long winter, you might notice that your windshield looks sparkling or hazy when the sun hits it directly. This is caused by thousands of microscopic impact craters from sand.

This pitting can refract light, causing glare that makes night driving or driving into the sun more difficult and dangerous. Headlight lenses can similarly become cloudy, reducing the effectiveness of your lights during dark winter evenings.

Sand also affects the mechanical movement of the vehicle. The grit can work its way into moving parts, such as brake calipers and suspension components.

If sand gets trapped between the brake pad and the rotor, it can cause premature wear or scoring on the rotor surface. It creates a grinding noise and can reduce braking efficiency, which is the last thing you want when navigating icy roads.

Immediate Steps After Driving on Treated Roads

Taking immediate action is the most effective way to mitigate the damage caused by winter road treatments. Regular washing is essential, even if the car is just going to get dirty again the next day.

The goal is not to keep the car looking showroom ready, but to remove the corrosive accumulation of salt and the abrasive layer of sand. Leaving this sludge on your car for weeks at a time allows the salt to do its worst work.

When washing your car in winter, focus heavily on the areas you cannot see. The undercarriage needs the most attention. Many automatic car washes offer an undercarriage spray cycle, which is highly recommended during the winter months.

If you are washing at home with a hose, spend extra time spraying up into the wheel wells and along the bottom rails of the vehicle. This flushes out the pockets of wet, salty sand that tend to gather in crevices.

Timing your washes is also important. Try to wash your vehicle on days when the temperature is slightly above freezing to prevent doors and locks from freezing shut. If you must wash it in freezing temperatures, be sure to dry the door jambs and seals thoroughly immediately afterward. It is a simple act of care that prevents the frustration of being frozen out of your car the next morning.

Long-Term Protective Measures

Beyond regular washing, applying protective barriers provides a shield against the elements. A high-quality polymer wax or ceramic coating applied before the first snow falls acts as a sacrificial layer.

It fills in the microscopic pores of the clear coat and prevents salt and sand from making direct contact with the paint. This makes it harder for dirt to stick and easier to wash off, giving your car a fighting chance against the grit.

For those living in areas with severe winters, professional rustproofing is a wise investment. There are various options, including oil-based sprays and rubberized coatings. Oil-based sprays are excellent because they creep into seams and crevices where moisture hides, displacing water and inhibiting rust.

These treatments usually need to be reapplied annually. Rubberized undercoatings provide a hard shell against sand abrasion but must be inspected regularly; if the coating cracks, moisture can get trapped behind it and cause rust to form unseen.

Regular inspections are a vital part of winter maintenance. Take a moment every few weeks to walk around your car. Look for new stone chips and touch them up with paint promptly to seal the metal.

Check your rubber floor mats to ensure salty water is not leaking onto the carpet, where it can rot the floorboards from the inside out. Paying attention to these small details allows you to address issues before they become expensive repairs.

Additional Winter Driving Tips

How you drive also impacts how much abuse your car takes. Increasing your following distance is a simple but effective habit. By staying further back from the car or plow truck in front of you, you reduce the amount of salty spray and sand hitting your vehicle. It also gives you more time to react to sudden stops on slippery roads.

Winter tires are another crucial consideration. While they are primarily designed for safety and traction, they also help protect the car. All-season tires can harden in cold temperatures, leading to loss of grip.

When tires slip, they spin, digging down into the sand and flinging it forcefully against the wheel wells. Winter tires remain pliable and maintain better traction, resulting in less wheel spin and less debris thrown against the car body.

Finally, keep an emergency kit in your vehicle. This should include items like a shovel, sand or kitty litter for traction, jumper cables, and a blanket. Being prepared reduces the likelihood that you will have to overexert your vehicle to get out of a snowbank, which protects the transmission and engine from unnecessary strain.

Staying Ahead of Winter’s Challenges

Winter driving does not have to result in a ruined vehicle. By understanding why sand and salt are used and how they affect your car, you can take proactive steps to minimize the damage. It is about consistent, gentle care—washing away the corrosive elements, sealing the paint, and driving with awareness.

Preventative maintenance is always more manageable and affordable than repairing rust damage or replacing corroded brake lines.

Treating your car with a little extra attention during the harsh months ensures it remains safe and reliable for you and your family. It allows you to navigate the season with confidence, knowing you have done your best to protect your investment.

By adopting these habits, you ensure the safety and longevity of your vehicle. You can enjoy the beauty of a winter drive, grateful for the cleared roads, while knowing that once you return home, a quick wash will wash away the worry along with the salt.

image credit: envato.com